Product Description
Description |
Microprocessor Control (CPU).
3-STAGE AUTOMATIC CHARGING:
This is a fully automatic battery charger with 3 charge stages.
Automatic charging protects your battery from being overcharged. So
you can leave the charger connected to the battery indefinitely.
3-stage chargers are suitable for most lead acid battery:Calcium,
Gel and AGM, Wet batteries. They may also help restore drained and
sulphated batteries.
1: Input Characteristics:
Input Voltage: 100-240V AC
Input Frequency: 50Hz or 60Hz and single phase.
Inrush Current (cold start):30A Max.@110Vac/60HZ/ 60A
Max.@230Vac/50HZ
Efficiency: ≥85.0% 230Vac/50Hz(Typical full load)
2: Output Characteristics:
Constant Charging Voltage: 14.7V Float charge 13.8V
C:Charging Mode Intelligent 12V 5-6A lead acid battery charger
3 Stages, CC, CV, Trickle
4: Safety Test for battery charger
Hi-pot Test:15KVac 5mA 3 Seconds between input and output test
Resistance:The liftpo4 battery charger insulation resistance shall
be not less 30M ohms after application of 500Vdc/10mA for 3 Seconds
Drop test: Height: The wheelchair battery chargerconform to BS
EN60068-2-32:1993 TEST ED: free fall appendix B
5: Protection for battery charger
Over Voltage Protection:The power supply will be auto recovered
when faults remove
Over Current Protection: Charger output current does not exceed the
set maximum battery charging current.
Over Short Circuit Protection :Battery charger output can be
shorted without damage No odor, smoke, fire, plastic deformation,
and excessive heal happen. The power shall be auto-recovery. (It
will enter into normal condition when then the fault condition is
removed)
Over reverse polarity Protection When the battery charger output
line reversed after the charger will not work until the right user
access only to start. |
Features:
LED indicator, more user-friendly design, clearly shows the
charging process.
Cooling vents, good heat dissipation, to avoid overheating damage
to the charger.
Pure copper transformer, stable output, high conversion rate,
energy saving, large capacity, etc.
Overcharge protection, short circuit protection, reverse connection
protection.
The shell is made of ABS flame retardant material, insulation,
flame retardant, high temperature.
Suitable for 12V/24V, 4AH to 200AH , Lead-Acid or AGM or GEL
battery.
Universal for most type of car and motorcycle batteries, lead acid,
agm, gel, vrla.
Our Services
Our Service
1. OEM Manufacturing welcome: Product, Package,logo and brand.
2. Sample order :Free sampls but you need pay for freight.
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two
days, until you get the products. When you got the goods, test
them, and give me a feedback.If you have any questions about the
problem, contact with us, we will offer the solve way for you.
